Dammit Thread Drill/Tap Bit Set - Six-Piece, 1/4" Hex Shank, High-Speed Steel Construction, Back-Tapered
$18.99
- Improve working efficiency by drilling, tapping, deburring and countersinking all at one time, saving time and overall costs
- Bits are back-tapered to avoid damage from over-drilling and the split-point tip starts drilling on contact to prevent walking
- Hardened, high-grade tool steel was used to craft each bit and sizes include M3x0.5, M4x0.7, M5x0.8, M6x1, M8x1.25, M10x1.5
- In Stock — Ships Today!
- Improve working efficiency by drilling, tapping, deburring and countersinking all at one time, saving time and overall costs
- Bits are back-tapered to avoid damage from over-drilling and the split-point tip starts drilling on contact to prevent walking
- Hardened, high-grade tool steel was used to craft each bit and sizes include M3x0.5, M4x0.7, M5x0.8, M6x1, M8x1.25, M10x1.5
$18.99
Drilling and tapping in a one-step process that will greatly save time and costs is what you get when you have the Dammit Thread Drill/Tap Bit Set in your toolbox. The self-centering point of these bits doesn't need assistant center drilling or center punching and the wide flutes carry the chips out of the hole. Drill, tap, deburr and countersink in wood, aluminum, plastic, concrete and steel up to 10-gauge. Each bit is rust-resistant and has a hex shank that will fit most electric drills. Have a smooth tapping experience with the Dammit Thread Drill/Tap Bit Set.